Non ci sono articoli nel tuo carrello
Spedizione da magazzino Europeo
nessuna tassa doganale è richiesta per le spedizioni nel mercato UE
Magazzino : Italy
Description: The heart of the kit is the much venerated ATMega328 using a 32kHz clock-source to keep time. To check the time, just press the button on the side of the clock and it pops up on a 4-digit 7-segment LED display. the ATMega is running at super low power and should get an estimated 2 years of run time on a single CR2032 button cell.The DIY clock is a through-hole kit with a low parts-count, so it makes a great project for beginning solderers. After you’ve finished soldering together the PCB, simply stack the acrylic pieces around it and screw them together with the included screws. Once that’s done, pop in the coin-cell battery and go show off your nerd bling!Features:Product weight about 50gDIY welding kitEstimated 2-year battery lifeLaser-cut acrylic shellLarge, easy-to-read displayPackage included:1 x Pre-programmed ATMega328 DIP IC1 x 4-digit 7-segment display1 x 32kHz crystal1 x 0.1uF capacitor1 x Button1 x 20mm button cell holder1 x 20mm button cell4 x M2*18 screw4 x M2 nut