Advantages:
First, the remote feeding is changed to short-range feeding(can be soft)
Second, the back pumping is more agile. The print is smoother (no drawing will occur)
Third, the feeding is more accurate, (no material failure)
● Installation Manual for you to reference: click to downloadFeatures: 1. 12v upgrade kit for remote change to short-range. Suit for CR-10 printer. Mature modules and reliable retrofit solutions.
2. The remote extrusion of the control arm for wire feeding is more precise.
3. The torque requirement for the extrusion stepping motor is lower, which reduces the probability of failure when plugging back and refueling. ,
4. Compatible with more types of consumables, such as flexible filament - TPU.
5. You can choose to exchange short-range or remote extrusion at any time. Disassembly is super simple, because this is a complete kit that does not affect any of your printer's original features.
6. The end is an aviation joint.
Specification:
Working voltage: 12v
Material: Aluminum / steel
Nozzle size: 0.4mm
Adaptation consumables: 1.75mm filament
Applicable models: For Crealityi3d CR-8/10/10S
Package Included:
1 x Extruder Drive Feed Kit for CR-101 x Extrusion motor extension cable 50CM
1 x MK9 silicone insulation sleeve
5 x Cable fixing ring
![]()
![]()
