Overview:
1. Working voltage: 19-24V maximum 10A
2. Master IC: ATMEL company's ATMEGA2560 16AU
3.FT232RL USB interface
4. Integration 5pcs A5984 stepper motor drives
5. With two heating ends, support dual-color printing (the max operating temperature depends on the material of the hotend)
6. The circuit board uses high-quality 4 laminates
7. With 4 MOSFET tubes, one of which is used to heat up the bed
8.24V power supply port with 5A, 10A, 15A recoverable fuse protection
9. There are two power input ports and one for the heated bed.
10. Based on the-Arduino-platform, support multiple firmware, a variety of PC software
11. Power off print out, nozzle cooling, automatic shutdown (expansion module)
12. Speed optimization: high-speed printing, or printing complex slice models, without carton
13. Extended SD card: The screen has its own SD card slot, which can also be expanded externally. The installation direction and location are not limited (expansion module)
14. History: Find Printed Documents Quickly
15. File Topping: GCODE files with the latest slices will be topped in the file list
16. One reset: press the screen reset key, and reset the motherboard together.
17. Convenient shunting: computer-free shunting, brushless firmware modification parameters (pulse, speed, acceleration, etc.)
18. Support: Double nozzle; Leveling orientation; Limit switch status monitoring; Temperature Control Curve; Custom instruction menu; Gcode command lineSoftware resources support:
- Compilation environment: Arduino IDE
- Firmware: Marlin
- PC software: printrun
- Repetier-Host (Chinese support)
Package Included:1 x F5 V1.1 motherboard
1 x 3.5 inch color display screen
1 x Link line
1 x USB line
1 x Touch screen pen